Главная

Каталоги / Catalogs

Словарь   Популярное
Металлообработка
на заказ
тел. 89210954455
instroykomplekt@mail.ru
Обновлено 2016-12-06 06:32:52 Просмотров 38
Металлорежущий инструмент и инструментальная оснастка / Cutting tools and tooling system

TUNGALOY | Каталог TUNGALOY 2007 Режущий инструмент (Всего 520 стр.)


Diamond is the hardest known material on earth This is an advanced diamond-based tool material in which tiny diamond crystals are tightly sintered on the c

470 Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр.464

470 Diamond is the hardest known material on earth This is an advanced diamond-based tool material in which tiny diamond crystals are tightly sintered on the c Каталог TUNGALOY 2007 Режущий инструмент для точения фрезерования сверления на металлообрабатывающем оборудовании и станках Стр. 464

Diamond is the hardest known material on earth This is an advanced diamond-based tool material in which tiny diamond crystals are tightly sintered on the c

Diamond is the hardest known material on earth. This is an advanced diamond-based tool material in which tiny diamond crystals are tightly sintered on the cemented carbide alloy base by means of a super high-pressure and -temperature process. When compared with the single-crystal diamond the hardness is slightly lower but PCD is uniform in structure. Additionally the heat resistance performance of singlecrystal diamond can differ according to the crystal quality and orientation. PCD is therefore optimum for cutting of non-ferrous and non-metal materials. Comparison of hardness Tool material Knoop hardness (Hk) T-DIA 6000 9000 Natural diamond 8000 12000 Structure of T-DIA Diamond content Vol. 88.0 91.0 94.0 96.5 Grain size (am) 4.5 12.5 28 45 Hardness (Hv) 9000 10000 11000 12000 Strength (GPa) 1.8 1.7 1.6 1.5 Features For precision machining of non-ferrous metals and nonmetals where high-quality surface finish is required. Features the finest grain structure in T-DIA series and excels in grindability and cutting edge sharpness. Used for machining of non-ferrous metals and nonmetals. Composed of medium and fine grain diamond provides moderate wear resistance and grindability. Can be used for machining half-sintered ceramics and cemented carbides stones and non-ferrous metals. Mixed sintered compact composed of large and fine grain diamond. Grindability is superior to that of DX180. Best suitable for turning half-sintered ceramics and cemented carbides. Features the highest purity and large grain PCD with excellent wear resistance. Regrinding method T-DIA Grade DX180 DX160 DX140 DX120 Wheel Diamond wheel Bond Vitrified bond Grain size Roughing 400 600 Finishing Finer than 1000 Concentration 100 125 Grinding speed 900 1200 m/min Grades Polycrystalline Diamond Compact (PCD) T-DIA Application N Non-ferrous metals



TUNGALOY | Каталог TUNGALOY 2007 Режущий инструмент (Всего 520 стр.)

Металлорежущий инструмент и инструментальная оснастка / Cutting tools and tooling system

467 Cermet Uncoated Substrate Coating layer Application Grade Application code Specific gravity Hardness (HRA) Transverse rupture strength (GPa) Main compositi Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр. 461 ENG467 468 Grades Polycrystalline Cubic Boron Nitride Compacts (PCBN) T-CBN Application K Difficult-to-cut materials BX90S BX950 BX480 BXC30 BX330 H Hard materials Th Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр. 462 ENG468 469 PCBN T-CBN C463 Polycrystalline Cubic Boron Nitride Compacts (PCBN) T-CBN Application Grade Hardness Microstructure (Hv) Transverse rupture strength (GPa) Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр. 463 ENG469 471 Tungaloy ceramics consist of high-purity fine powder oxides nitrides and carbides sintered through normal pressure gas pressure and HIP sintering The fine Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр. 465 ENG471 Tungaloy ceramics consist of high-purity fine powder oxides nitrides and carbides sintered through normal pressure gas pressure and HIP sintering The fine472 Cemented carbide Tungaloy is manufactured by sintering refractory carbide such as tungsten carbide (WC) titanium carbide (TiC) and tantulum carbide (TaC) p Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр. 466 ENG472 Cemented carbide Tungaloy is manufactured by sintering refractory carbide such as tungsten carbide (WC) titanium carbide (TiC) and tantulum carbide (TaC) p473 Micro-Alloy is characterized by the WC hard phase (major component) which is extremely fine (average particle size 1 im or less) when compared with normal Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр. 467 ENG473 Micro-Alloy is characterized by the WC hard phase (major component) which is extremely fine (average particle size 1 im or less) when compared with normal


См.также / See also :

Каталог TUNGALOY 2014 Металлорежущий инструмент и инструментальная оснастка
Каталог
TUNGALOY
2014
Металлорежущий
инструмент
(968 страниц)
Каталог TUNGALOY 2009 Металлорежущий инструмент для точения фрезерования сверления на металлообрабатывающих предприятиях
Каталог
TUNGALOY
2009
Металлорежущий
инструмент
(555 страниц)

---

---



Главная / Home | Каталоги / Catalogs | Словарь / Index | Популярное / Popular | Контакты / Contacts

Все использованные информационные материалы являются собственностью их Уважаемых Владельцев.
All copyrights remain by their owners.

updated 06.12.2016 at 06:32:52 for those 38 interested and for those 31 unique visitors who already was here 38 times. GGServer20170325 generate this page in 0,001 seconds.

Система "Промышленные каталоги" / Industrial catalogs
© 2002 - 2017 Лаборатория 2У / Lab2U
Стр. / Page Lab2U54084180